Ultrasonic cleaning machine must add a certain amount of cleaning fluid and cleaning agent to work normally, which is determined by the cleaning principle of ultrasonic cleaning itself. Only in the liquid can ultrasonic cleaning produce cavitation effect and achieve the purpose of cleaning. The selection of cleaning fluid and cleaning agent for ultrasonic cleaning machine should be determined according to the characteristics of the cleaning system and the cleaning workpiece. Generally speaking, water is selected as the cleaning fluid, and the cleaning agent depends on the process. Here we will analyze the factors that should be based on the selection of ultrasonic cleaning solution solvent
1. Features of cleaning workpiece: conventional cleaning process directly add ultrasonic cleaning, cleaning solution does not change. However, we can first see whether water can be used as the cleaning solution for most workpieces. The cost of this kind of cleaning fluid is low. Water is a kind of relatively environmentally friendly cleaning fluid. Kerosene and alcohol lamp may be used as cleaning fluid for some special workpieces.
2. Cleaning effect: most enterprises choose ultrasonic cleaning to improve the cleaning effect. Whether it is water-based cleaning or other solutions as cleaning, the cleaning effect should be considered. To see what kind of cleaning fluid and cleaning agent can achieve good cleaning effect, you can consult the relevant manufacturers and try it out, or you can determine the cleaning solvent by constantly adjusting the type and quantity of cleaning agent to test the cleaning effect.
3. Cleaning cost: some enterprises choose ultrasonic cleaning to reduce costs, such as automobile repair and other industries. Therefore, the choice of ultrasonic cleaning solution and cleaning agent should also consider low input and high output. Of course, low-cost cleaning solution solvent is not necessarily low-cost, but also depends on its degree of cleaning and cleaning amount and safety
4. Simple operation: some cleaning solutions may have low cost and good cleaning effect, but they are difficult to configure and the supply of cleaning solvents is insufficient. For example, some imported cleaning solvents have a long purchase cycle, which may delay production.